国产裸体美女视频全黄

                                  您好,歡迎訪問無錫樂洋化機制造有限公司官網!

                                  您的位置:首頁 > 產品中心 > 反應釜

                                  多功能提取罐

                                  • 多功能提取罐

                                  多功能提取罐

                                  • 多功能提取罐可用于中藥、食品、化工行業的常壓、微壓、水煎、溫浸、熱回流、強制循環、滲漉、芳香油提取及有機溶媒的回收等多種工藝操作。使用本設備能使提取效果更佳、時間短、藥液含量高。本設備是目前的傳統中藥提取設備,主要用于制藥、食品、化工等行業中物料的水提取及有機溶媒的提取。

                                  詳細信息

                                  多功能提取罐主要結構特點:
                                  1、加熱形式:夾套加熱,底部無熱源形成加熱死角。
                                  2、提取效率:靜態加熱方式,因底部無熱源形成加熱死角,使底部藥材提取不完全。上漂浮的藥材(提取沸騰后慢慢的浸入在提取液中)和其它的藥材提取時間不一樣提取不完全。設備結構問題降低了提取效率。
                                  3、出渣出液:錐型提取大部分是大型設備,考慮其密封及底部熱源問題采用此結構。但生產過程中出液及出渣較為困難。因底部面積小藥材易堵塞造成出液不暢,出渣易搭橋需要人工輔助出渣,工人勞動強度大,占用非生產工時多。
                                  4、操作安全:夾套加熱沸騰后較難控制二次蒸汽流量,因系統蒸汽壓力的不穩定性,需要操作人員隨時調控閥門控制蒸汽壓力,來維持提取微沸狀態,掌控不好(夾套加熱相對加熱面積大)容易造成二次蒸汽流量大攜帶皂甙及漂浮的藥材堵塞管道形成設備生產帶壓爆沸。給生產人員帶來傷害,給生產帶來損失。
                                  5、安裝空間:此結構設備直徑大高度底,占用空間相對較小。

                                   

                                  Main structural features of multi-function extraction tank:
                                  1. Heating form: the jacket is heated, and no heat source is formed at the bottom to form a heating dead angle.
                                  2, extraction efficiency: static heating mode, because there is no heat source at the bottom to form a heating dead angle, so that the bottom medicine is not completely extracted. The floating medicinal material (slowly immersed in the extract after boiling) is not completely extracted from other medicinal materials. Device structure issues reduce extraction efficiency.
                                  3, slag discharge: cone extraction is mostly large equipment, considering the structure of its seal and bottom heat source. However, it is more difficult to discharge and slag during the production process. Due to the easy clogging of the small area of ??the bottom material, the liquid discharge is not smooth, and the slag is easy to bridge the bridge, which requires manual assisted slag discharge. The labor intensity of the worker is large, and the occupation time is not large.
                                  4. Operation safety: It is difficult to control the secondary steam flow after the jacket is heated and boiled. Due to the instability of the system steam pressure, the operator needs to control the valve to control the steam pressure at any time to maintain the micro-boiling state and control. Heating relative to the heating area is large) It is easy to cause the secondary steam flow to carry the saponin and the floating medicinal material to block the pipeline forming equipment to produce pressure bump. Bring damage to production personnel and bring losses to production.
                                  5. Installation space: This structure has a large diameter and a large bottom, and the occupied space is relatively small.
                                   

                                  [返回]    反應釜

                                  contact

                                  聯系人:張先生

                                  手 機:13706171919 / 18861852393

                                  Q Q:594297866

                                  郵 箱:wuxileyang@163.com

                                  Qr code

                                  無錫樂洋化機制造有限公司 地 址:無錫市濱湖區雪浪街道山水城科技工業園28-2號

                                  技術支持:杭州四喜

                                  備案號: 蘇ICP備19014982號-1